REMOVAL & INSTALLATION
See Figure 1
Only 1995-96 3.0L engines use an external ICM. 1997-98 3.0L and all 3.8L engines have the ICM incorporated into the Power Control Module (PCM).
- Disconnect the negative battery cable.
- Disconnect the wiring harness from the ICM.
- Remove the ICM.
- Position the ICM onto the inner fender apron and install the mounting bolts. Tighten the bolts to 27-35 inch lbs. (3-4 Nm).
- Connect the wiring harness to the ICM.
- Connect the negative battery cable.