Forenza 2007

Driver's Side Module

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Disarm the Air Bag system.
  4.  
  5. Remove the audio control switch.
  6.  
  7. Remove the cruise control switch.
  8.  
  9. Remove two driver airbag module mounting bolts and discard them.
  10.  
  11. Lean the airbag module forward just enough to access the connector.
  12.  
  13. Remove the connectors from the driver airbag module.

    Click image to see an enlarged view

    Fig. Drivers SRS Module removal view

  14.  
  15. Remove the driver airbag module.

    Click image to see an enlarged view

    Fig. Drivers SRS Module removal view second step

  16.  

To install:

  1. Install the driver airbag module.
  2.  
  3. Install the connector to the driver airbag module.
  4.  
  5. Install two new driver airbag module mounting bolts.
  6.  
  7. Install the cruise control switch.
  8.  
  9. Install the audio control switch.
  10.  

 
label.common.footer.alt.autozoneLogo