Forenza 2007

Brake System Bleeding

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Turn ignition switch off.
  4.  
  5. Connect a vinyl tube to the right rear bleed valve. Be sure to have a catch pan handy for fluid.
  6.  
  7. Fully depress brake pedal four or five times.
  8.  
  9. With brake pedal firmly depressed loosen bleed valve to let air out of system.
  10.  
  11. Tighten bleed valve.
  12.  
  13. Repeat the above steps at each wheel .
  14.  
  15. Bleed the remaining components as needed.
    NOTE
    Be sure to keep brake fluid reservoir tank full during procedure.

  16.  

 
label.common.footer.alt.autozoneLogo