Forenza 2007

Master Cylinder

Print

Removal & Installation



  1. Before disconnecting the reservoir tank hose, remove the clutch/brake fluid from the reservoir tank.
  2.  
  3. Remove the locking clip.
  4.  
  5. Remove the push rod fixing pin and push rod.

    Click image to see an enlarged view

    Fig. Locking clip and related parts

  6.  
  7. Disconnect the hose clamp on the master cylinder.
  8.  
  9. Disconnect the master cylinder hose.
  10.  
  11. Remove the master cylinder pipe.

    Click image to see an enlarged view

    Fig. Master cylinder

  12.  
  13. Remove the clutch master cylinder nuts.
  14.  
  15. Remove the clutch master cylinder.
  16.  

To install:

  1. Install the clutch master cylinder and clutch master cylinder nuts.
  2.  
  3. Tighten the clutch master cylinder nuts to 16 ft. lbs. (22 Nm)
  4.  
  5. Install the master cylinder pipe.
  6.  
  7. Connect the master cylinder hose.
  8.  
  9. Connect the hose clamp on the master cylinder.

    Click image to see an enlarged view

    Fig. Master cylinder and feed hose

  10.  
  11. Install the push rod fixing pin and push rod.
  12.  
  13. Install the locking clip.
  14.  
  15. Bleed the air.
  16.  
  17. Adjust the clutch pedal.
  18.  
  19. Fill the reservoir with clutch/brake fluid up to the proper level.
  20.  

 
label.common.footer.alt.autozoneLogo