Forenza 2007

Slave (Release) Cylinder

Print

Removal & Installation



  1. Remove the transaxle from the vehicle.
  2.  
  3. Remove the slave cylinder retaining bolts.
  4.  
  5. Disconnect the slave cylinder pipe from the slave cylinder.

    Click image to see an enlarged view

    Fig. Slave cylinder and pipe

  6.  
  7. Remove the bushing from the slave cylinder pipe in the transaxle housing.
  8.  
  9. Remove the slave cylinder pipe.
  10.  
  11. Remove the O-ring and the slave cylinder.

    Click image to see an enlarged view

    Fig. O-ring and slave cylinder

  12.  

To install:

  1. Install the concentric slave cylinder and the pipe.
  2.  
  3. After installing the pipe screw provisionally, tighten the concentric slave cylinder retaining bolts.
  4.  
  5. Tighten the concentric slave cylinder retaining bolts to 62 inch lbs. (7 Nm)
  6.  
  7. Tighten the pipe screw.
  8.  
  9. Tighten the pipe screw to 11 ft. lbs. (15 Nm)
  10.  
  11. Install the bushing onto the transaxle housing.
  12.  
  13. Connect the pipe with bushing.
  14.  
  15. Install the transaxle into the vehicle.

    Click image to see an enlarged view

    Fig. Pipe, bushing and transaxle

  16.  

 
label.common.footer.alt.autozoneLogo