Forenza 2007

Ignition Coil Pack

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the Electronic Ignition (EI) system ignition coil connector.
  4.  
  5. Note the ignition wire location and remove the ignition wires.
  6.  
  7. Remove the ignition coil retaining bolts.
  8.  
  9. Remove the ignition coil.

    Click image to see an enlarged view

    Fig. Ignition coil location

  10.  

To install:

  1. Install the ignition coil into the mounting location and install the retaining bolts.
  2.  
  3. Tighten ignition coil retaining bolts to 89 inch lbs.
  4.  
  5. Connect the ignition coil connector.
  6.  
  7. Install the ignition wires.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo