Removal & Installation
- Remove manual transaxle, as outlined in the Drivetrain Section.
- Remove pressure plate and clutch disc.
- Loosen flywheel bolts in a star pattern.
- Remove flywheel.
- Install flywheel.
- Install flywheel bolts.
Tighten flywheel bolts in a star pattern as follows:
- Step 1: Tighten to 48 ft lbs. (65 Nm)
- Step 2: Plus 30 degrees
- Step 3: Plus 15 degrees
- Install clutch disc and pressure plate.
- Install manual transaxle.