Forenza 2007

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Raise and suitably support the vehicle.
  2.  
  3. Remove the stabilizer shaft-to-stabilizer link nut.
  4.  
  5. Remove the crossmember.
  6.  
  7. Remove the stabilizer shaft-to-crossmember clamp bolts.
  8.  
  9. Remove the stabilizer shaft, the stabilizer shaft insulator clamp, and the insulators from the vehicle.

    Click image to see an enlarged view

    Fig. Stabilizer shaft, insulators and crossmember

  10.  

To install:

  1. Install the stabilizer shaft.
  2.  
  3. Install the stabilizer shaft insulator clamps, the stabilizer shaft clamp bolt, and the insulators onto the crossmember.
  4.  
  5. Do not tighten the bolt.
  6.  
  7. Install the stabilizer link onto the stabilizer shaft and connect them with the stabilizer shaft-to-stabilizer link nut.
  8.  
  9. Tighten the stabilizer shaft-to-stabilizer link nut to 35 ft. lbs. (47 Nm).
  10.  
  11. Tighten the stabilizer shaft-to-crossmember clamp bolts to 18 ft. lbs. (25 Nm).
  12.  
  13. Install the front wheels.
  14.  

 
label.common.footer.alt.autozoneLogo