Forenza 2007

Throttle Body

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the Intake Air Temperature (IAT) sensor connector.
  4.  
  5. Disconnect the breather hose from the valve cover.
  6.  
  7. Remove the air intake tube.
  8.  
  9. Disconnect the throttle cables by opening the throttle and moving the cable through the release slot.
  10.  
  11. Disconnect the vacuum hoses from the throttle body.
  12.  
  13. Disconnect the Throttle Position (TP) sensor and the idle air control valve connectors.
  14.  
  15. Disconnect the coolant hoses from the throttle body.
  16.  
  17. Remove the throttle body and discard the gasket.
  18.  
  19. Remove the TP sensor.
  20.  
  21. Remove the Idle Air Control (IAC) valve.
  22.  
  23. Remove the throttle body retaining nuts.
  24.  
  25. Remove the throttle body.
  26.  

To install:

  1. Install the throttle body.
  2.  
  3. Connect the TP sensor connector and the IAC valve connector.
  4.  
  5. Connect the coolant hoses to the throttle body.
  6.  
  7. Connect the vacuum hoses to the throttle body.
  8.  
  9. Connect the throttle cable.
  10.  
  11. Install the air intake tube.
  12.  
  13. Connect the breather hose to the valve cover.
  14.  
  15. Connect the IAT sensor connector.
  16.  
  17. Connect the negative battery cable.
  18.  
  19. Fill the cooling system.
  20.  

 
label.common.footer.alt.autozoneLogo