Forenza 2007

Window Systems

Print

Power Windows



Diagnosis & Testing
  1. Check fuses Ef9 and Ef14.
  2.  
  3. Check for voltage at window switch.
  4.  
  5. Check for voltage at window motor.
  6.  
  7. Check for any disconnected wires.
  8.  
  9. Check for voltage at terminal 30 and 86 of the power window relay socket.
  10.  
  11. Check power window relay operation.
  12.  
  13. Check ground connections.

    Click image to see an enlarged view

    Fig. Power Window Schematic

  14.  

Removal & Installation
Motor & Regulator

Specific to:

Suzuki Forenza 2007-2008

Suzuki Reno 2007-2008

  1. Disconnect the negative battery cable.
  2.  
  3. Lower the front window.
  4.  
  5. Remove the window frame inner cover.
  6.  
  7. Remove the front door escutcheon.

    Click image to see an enlarged view

    Fig. Front door panel

  8.  
  9. Remove the rear deck lid remote switch and the power window/mirror control switch.
  10.  
  11. Disconnect the electrical connectors.
  12.  
  13. Remove the door trim panel screws.
  14.  
  15. Pry off the trim panel using the trim remover KM-475-B.
  16.  
  17. Disconnect the status display connector.
  18.  
  19. Remove the door seal trim.
  20.  
  21. Remove the outside channel molding screw.
  22.  
  23. Lift the outside channel molding off the door.

    Click image to see an enlarged view

    Fig. Channel molding removal

  24.  
  25. Remove the screws that secure the glass to the window regulator.
  26.  
  27. Remove the glass from the door.

    Click image to see an enlarged view

    Fig. Window glass removal

  28.  
  29. Disconnect the electrical connector.
  30.  
  31. Remove the nuts and the window regulator.

    Click image to see an enlarged view

    Fig. Window regulator removal

  32.  

To install:

  1. Reverse procedure for installation.
  2.  

Switch

Specific to:

Suzuki Forenza 2007-2008

Suzuki Reno 2007-2008

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the rear deck lid remote switch and the power window/mirror control switch.
  4.  
  5. Disconnect the electrical connectors.

    Click image to see an enlarged view

    Fig. Door switch removal

  6.  
  7. Connect electrical connectors.
  8.  
  9. Install rear deck lid remote switch and the power window/mirror control switch.
  10.  
  11. Reconnect negative battery cable
  12.  

 
label.common.footer.alt.autozoneLogo