Forenza 2007

Exterior Lighting

Print

Headlights



Removal & Installation
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the headlamp mounting bolts.
  4.  
  5. Remove the headlamp mounting nut.

    Click image to see an enlarged view

    Fig. Head light assembly-rear mounting nut location

  6.  
  7. Disconnect the turn signal lamp electrical connector.
  8.  
  9. Disconnect the headlamp electrical connector.
  10.  
  11. Remove the headlamp assembly.
  12.  
  13. Turn left and remove the headlamp low-beam cap.
  14.  
  15. Dry off the headlamp low-beam bulb clip.
  16.  
  17. Disconnect the headlamp low-beam bulb connector.
  18.  
  19. Remove the headlamp low-beam bulb.
  20.  
  21. Remove the park lamp.
  22.  
  23. Remove the headlamp high-beam cap.
  24.  
  25. Pry off the headlamp high-beam bulb clip.
  26.  
  27. Disconnect the headlamp high-beam bulb connector.
  28.  
  29. Remove the headlamp high-beam bulb.
  30.  
  31. Remove the turn signal lamp.

    Click image to see an enlarged view

    Fig. Headlight assembly

  32.  

To install:

  1. To install the headlamp assembly:
  2.  
  3. Install the turn signal lamp.
  4.  
  5. Install the headlamp high-beam bulb.
  6.  
  7. Connect the headlamp high-beam bulb connector.
  8.  
  9. Install the headlamp high-beam bulb clip.
  10.  
  11. Install the cap concealing the headlamp high-beam bulb.
  12.  
  13. Install the park lamp.
  14.  
  15. Install the headlamp low-beam bulb.
  16.  
  17. Install the headlamp low-beam bulb clip.
  18.  
  19. Connect the headlamp low-beam bulb connectors.
  20.  
  21. Install the cap concealing the headlamp low-beam bulb.
  22.  
  23. Connect the headlamp electrical connector.
  24.  
  25. Connect the turn signal lamp electrical connector.
  26.  
  27. Install the headlamp assembly.
  28.  
  29. Install the headlamp mounting bolts.
  30.  
  31. Tighten the headlamp mounting bolts to 35 inch lbs. (4 Nm).
  32.  
  33. Install the headlamp mounting nut.
  34.  
  35. Tighten the headlamp mounting nut to 35 inch lbs. (4 Nm).
  36.  
  37. Connect the negative battery cable.
  38.  

Tail Lights



Removal & Installation
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the nuts and the lamp assembly.
  4.  
  5. Remove the bulb(s).

    Click image to see an enlarged view

    Fig. View of the taillight assembly

  6.  

To install:

  1. Install the bulb(s).
  2.  
  3. Install the lamp assembly with the nuts.
  4.  
  5. Tighten the rear combination lamp assembly nuts to 35 inch lb. (4 Nm).
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo