Forenza 2007

Brake Disc (Rotor)

Print

Removal & Installation



  1. Remove the caliper.
  2.  
  3. Remove the brake pads.
  4.  
  5. Remove the caliper mounting bracket.

    Click image to see an enlarged view

    Fig. Caliper and mounting bolts

  6.  
  7. Remove the rotor detent screw.
  8.  
  9. Remove the rotor.
  10.  

To install:

  1. Install the rotor on the front wheel hub and install the detent screw.
  2.  
  3. Tighten the rotor detent screw to 35 inch lbs. (4 Nm)
  4.  
  5. Apply a few drops of thread-locking compound to the caliper bracket mounting bolts and install the caliper bracket.
  6.  
  7. Tighten the caliper bracket mounting bolts to 41ft. lbs. (56 Nm)
  8.  
  9. Install the brake shoes and the caliper.
  10.  

 
label.common.footer.alt.autozoneLogo