Forenza 2007

Brake Pads

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and safely support the rear of the vehicle.
  4.  
  5. Remove the wheels.
  6.  
  7. Remove the lower caliper guide pin bolt.
  8.  
  9. Pivot the caliper upward.
  10.  
  11. Remove the brake pads.
  12.  

To install:

  1. Measure the minimum brake shoe lining thickness.
  2.  
  3. Install the brake pads into the caliper.
  4.  
  5. Push the piston inward, if needed.
  6.  
  7. Pivot the caliper downward and tighten the bolt to 20 ft. lbs. (27 Nm).
  8.  
  9. Install the rear wheels.
  10.  
  11. Lower the vehicle.
  12.  

 
label.common.footer.alt.autozoneLogo