Forenza 2007

Wheel Hubs & Bearings

Print

Adjustment



Specific to:

Suzuki Forenza 2007-2008

Suzuki Reno 2007-2008

The front wheel bearings are a cartridge type design and cannot be adjusted.

Removal & Installation



Specific to:

Suzuki Forenza 2007-2008

Suzuki Reno 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove the wheel.
  6.  
  7. Remove the rear brake caliper and rear brake disc.
  8.  
  9. Remove the hub bolts and hub assembly.

    Click image to see an enlarged view

    Fig. Remove/install 4 hub/bearing assembly mounting bolts

  10.  

To install:

  1. Install the hub assembly.
  2.  
  3. Tighten the hub assembly bolts to 48 ft. lbs. (65 Nm).
  4.  
  5. Install the hub nut.
  6.  
  7. Install the rear brake disc and rear brake caliper.
  8.  
  9. Install the wheel.
  10.  
  11. Lower the vehicle.
  12.  
  13. Check to ensure that the brakes are free from dragging and that proper braking is obtained.
  14.  

Repacking



Specific to:

Suzuki Forenza 2007-2008

Suzuki Reno 2007-2008

Front wheel bearings are a cartridge type and cannot be repacked.

 
label.common.footer.alt.autozoneLogo