Forenza 2007

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Disarm the SRS (air bag system), as outlined in the Chassis Electrical Section.
  4.  
  5. Remove the driver-s side SRS module, as outlined in the Chassis Electrical Section.
  6.  
  7. Remove the steering wheel nut and the retaining clip.
  8.  
  9. Remove the steering wheel using the steering wheel puller.
  10.  
  11. Unclip the contact ring from the steering wheel, if necessary.
  12.  

To install:

  1. Clip the contact ring on the steering wheel, if necessary.
  2.  
  3. Align the match marks on the steering wheel and the steering column shaft. Turn the signal canceling cam on the wheel to the left.
  4.  
  5. Install the retaining clip and the steering wheel nut.
  6.  
  7. Tighten the steering wheel nut to 28 ft. lbs. (38 Nm).
  8.  
  9. Bend the tabs to secure the retaining clip.
  10.  
  11. Install the driver-s side SRS module, as outlined in the Chassis Electrical Section.
  12.  
  13. Connect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo