Forenza 2007

Rear Window Washer/Wiper Systems

Print

Removal & Installation



Wiper Motor

The rear window wiper system consists of a wiper motor, a wiper arm, and a blade. The rear window wiper motor is located inside the hatchback/tailgate door and is directly connected to the rear window wiper.

Hatchback

Specific to:

Suzuki Forenza 2007-2008

Suzuki Reno 2007-2008

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the rear window wiper arm.
  4.  
  5. Remove the hatchback door lower garnish molding.
  6.  
  7. Remove the bolts and the rear wiper motor.
  8.  
  9. Disconnect the electrical connector.
  10.  

To install:

  1. Connect the electrical connector.
  2.  
  3. Install the rear wiper motor with the bolts.
  4.  
  5. Tighten the rear wiper motor bolts to 80 inch. lbs. (9 Nm).
  6.  
  7. Install the hatchback door lower garnish molding.
  8.  
  9. Install the rear window wiper arm.
  10.  
  11. Torque the rear wiper arm nut to 97 inch lbs. (11Nm).
  12.  
  13. Connect the negative battery cable.

    Click image to see an enlarged view

    Fig. Rear wiper motor-hatch models

  14.  

Station Wagon

Specific to:

Suzuki Forenza 2007-2008

Suzuki Reno 2007-2008

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the rear window wiper arm.
  4.  
  5. Remove the station wagon door trim cover.
  6.  
  7. Remove the bolts and the rear wiper motor.
  8.  
  9. Disconnect the electrical connector.
  10.  

To install:

  1. Connect the electrical connector.
  2.  
  3. Install the rear wiper motor with the bolts.
  4.  
  5. Tighten the rear wiper motor bolts to 80 inch lbs.(9 Nm).
  6.  
  7. Install the station wagon door trim cover.
  8.  
  9. Install the rear window wiper arm.
  10.  
  11. Torque the rear wiper arm nut to 97 inch lbs.(11Nm).
  12.  
  13. Connect the negative battery cable.

    Click image to see an enlarged view

    Fig. Rear wiper motor-station wagon

  14.  

Wiper Washer
Hatchback

Specific to:

Suzuki Forenza 2007-2008

Suzuki Reno 2007-2008

The hatchback has a hatch-mounted rear window washer nozzle and on the wagon, the washer nozzle is incorporated into the rear wiper motor. The rear window washer reservoir is mounted behind the front left wheel well splash shield.

Station Wagon

Specific to:

Suzuki Forenza 2007-2008

Suzuki Reno 2007-2008

The rear window washer system is equipped with a separate washer fluid pump and hose. The rear window washer reservoir is mounted behind the front left wheel well splash shield.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the front left wheel.
  4.  
  5. Remove the bolts, the screws and the front wheel well splash shield.
  6.  
  7. Disconnect the electrical connector.
  8.  
  9. Disconnect the washer hose from the washer pump.
  10.  
  11. Remove the washer pump.

    Click image to see an enlarged view

    Fig. Washer pump removal-rear pump

  12.  

To install:

  1. Install the washer pump.
  2.  
  3. Connect the washer hose to the washer pump.
  4.  
  5. Connect the electrical connector.
  6.  
  7. Install the front wheel well splash shield with the bolts and the screws.
  8.  
  9. Tighten the front wheel well splash shield bolts to 13 inch. lbs. (1.5 Nm)
  10.  
  11. Install the front left wheel.
  12.  
  13. Connect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo