Forenza 2007

Windshield Washer Systems

Print

Removal & Installation



Motor/Pump
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the front left wheel.
  4.  
  5. Remove the bolts, the screws and the front wheel well splash shield.
  6.  
  7. Disconnect the electrical connector.
  8.  
  9. Disconnect the washer hose from the washer pump.
  10.  
  11. Remove the washer pump.

    Click image to see an enlarged view

    Fig. Washer pump removal

  12.  

To install:

  1. Install the washer pump.
  2.  
  3. Connect the washer hose to the washer pump.
  4.  
  5. Connect the electrical connector.
  6.  
  7. Install the front wheel well splash shield with the bolts and the screws.
  8.  
  9. Tighten the front wheel well splash shield bolts to 13 inch lbs. (1.5 Nm).
  10.  
  11. Install the front left wheel.
  12.  
  13. Connect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo