G6 2005-2007

Removal & Installation

Print

  1. Remove the fuse labeled HVAC CTRL (BATT).
  2.  
  3. Completely open the instrument panel (I/P) compartment door by pressing both tabs that support the stop bumpers.
  4.  
  5. Remove the air temperature actuator screws.
  6.  
  7. Remove the air temperature actuator.
  8.  
  9. Disconnect the air temperature actuator electrical connector.
  10.  

To install:

  1. Connect the air temperature actuator electrical connector.
  2.  
  3. Install the air temperature actuator.
  4.  
  5. Install the air temperature actuator screws.
  6.  
  7. Close the I/P compartment door.
  8.  
  9. Install the fuse labeled HVAC CTRL (BATT).
  10.  

 
label.common.footer.alt.autozoneLogo