G6 2005-2007

Bleeding the ABS System

Print

  1. Raise the vehicle on a suitable support.
  2.  
  3. Remove all four tire and wheel assemblies.
  4.  
  5. Inspect the brake system for leaks and visual damage.
  6.  
  7. Inspect the battery state of charge.
  8.  
  9. Install a scan tool.
  10.  
  11. Turn ON the ignition, with the engine OFF.
  12.  
  13. With the scan tool, establish communications with the EBCM. Select Special Functions. Select Automated Bleed from the Special Functions menu.
  14.  
  15. Bleed the base brake system.
  16.  
  17. Follow the scan tool directions until the desired brake pedal height is achieved.
  18.  
  19. When the desired pedal height is achieved, press the brake pedal in order to inspect for firmness.
  20.  
  21. Remove the scan tool.
  22.  
  23. Install the tire and wheel assemblies.
  24.  
  25. Inspect the brake fluid level.
  26.  
  27. Road test the vehicle while inspecting that the pedal remains high and firm.
  28.  

 
label.common.footer.alt.autozoneLogo