G6 2005-2007

Removal & Installation

Print

  1. Remove the right closeout panel.
  2.  
  3. Remove the blower motor resistor wire harness connector.
  4.  
  5. Remove the blower motor resistor screws.
  6.  
  7. Remove the blower motor resistor.

    Click image to see an enlarged view

    Fig. Blower motor resistor view

  8.  

To install:

  1. Install the blower motor resistor.
  2.  
  3. Tighten the blower motor resistor screws and tighten to 13 inch. lbs. ( 1.5 Nm).
  4.  
  5. Install the blower motor resistor wire harness connector.
  6.  
  7. Install the right closeout panel.
  8.  

 
label.common.footer.alt.autozoneLogo