G6 2005-2007

Actuator Cylinder

Print

Removal & Installation



  1. Disconnect the clutch actuator cylinder line.
  2.  
  3. Remove the transmission.
  4.  
  5. Remove the clutch actuator cylinder body bolts.
  6.  
  7. Remove the upper line retainer bolt.
  8.  
  9. Remove the actuator.
  10.  

To install:

  1. Lubricate the inside diameter of the bearing.
  2.  
  3. Install the clutch actuator cylinder and the body bolts, tighten to 89 inch. lbs. (10 Nm).
  4.  
  5. Install the upper line retainer bolt.
  6.  
  7. Install the transmission.
  8.  
  9. Connect the clutch actuator cylinder line.
  10.  
  11. Bleed the hydraulic system.
  12.  

 
label.common.footer.alt.autozoneLogo