G6 2005-2007

Hydraulic System

Print

Bleeding



  1. Clean dirt and grease from the cap in order to ensure that no foreign substances enter the system.
  2.  
  3. Attach a hose to the bleeder screw on the clutch actuator assembly. Submerge the other end of the hose in a container of clutch fluid.
  4.  
  5. Depress the clutch pedal slowly and hold.
  6.  
  7. Loosen the bleeder screw to purge air.
  8.  
  9. Tighten the bleeder screw.
  10.  
  11. Repeat until air is purged.
  12.  
  13. Fill the reservoir to the top with fluid.
  14.  
  15. Check the clutch operation and repeat if necessary.
  16.  

 
label.common.footer.alt.autozoneLogo