G6 2005-2007

Removal & Installation

Print

  1. Recover the refrigerant.
  2.  
  3. Remove the drive belt.
  4.  
  5. Raise and support the vehicle.
  6.  
  7. Remove the right front fender liner.
  8.  
  9. Disconnect the electrical connector.
  10.  
  11. Remove the A/C compressor hose from the A/C compressor and cap hose.
  12.  
  13. Remove and discard the sealing washers.
  14.  
  15. Remove the compressor.
  16.  

To install:

  1. Install the compressor and tighten the bolts.
  2.  
  3. 2.4L engine, tighten mounting bolts to 16 ft. lbs. (22 Nm).
  4.  
  5. 3.5L-3.9L-3.6L engines 37 ft. lbs. (50 Nm).
  6.  
  7. Install new sealing washers.
  8.  
  9. Install the A/C compressor hose to the A/C compressor and tighten to 15 ft. lbs. (20 Nm).
  10.  
  11. Connect the electrical connector.
  12.  
  13. Install the right front fender liner.
  14.  
  15. Install the drive belt.
  16.  
  17. Recharge the A/C system.
  18.  

 
label.common.footer.alt.autozoneLogo