G6 2005-2007

Removal & Installation

Print

  1. Remove the fuel tank.
  2.  
  3. Remove the fuel tank module assembly.
  4.  
  5. Remove the fuel level sensor wiring harness from the clip (2) on the module.
  6.  
  7. Disconnect the fuel level sensor electrical connector from the pump module electrical connector.
  8.  
  9. Push the tab on the sensor in towards the sensor and remove the level sensor from the module alignment feature.
  10.  

To install:

  1. Connect the fuel level sensor electrical connector to the pump module electrical connector.
  2.  
  3. Align the tab opening on the rear of the fuel level senor with the module alignment feature.
  4.  
  5. Press the tab on the sensor out away from the sensor securing the sensor to the module.
  6.  
  7. Install the fuel level sensor wiring harness to the clip on the module.
  8.  
  9. Install the fuel tank module assembly.
  10.  
  11. Install fuel tank.
  12.  

 
label.common.footer.alt.autozoneLogo