G6 2005-2007

Removal & Installation

Print

  1. Remove the fuse labeled HVAC CTRL (BATT).
  2.  
  3. Remove the left closeout panel.
  4.  
  5. Remove the knee bolster.
  6.  
  7. Remove the mode actuator retaining screws.
  8.  
  9. Remove the mode actuator.
  10.  
  11. Disconnect the mode actuator electrical connector.
  12.  
  13. Remove the mode actuator retaining screws.
  14.  
  15. Remove the mode actuator.
  16.  
  17. Disconnect the mode actuator electrical connector.
  18.  

To install:

  1. Install the mode actuator.
  2.  
  3. Install the mode actuator retaining screws.
  4.  
  5. Connect the mode actuator electrical connector.
  6.  
  7. Install the knee bolster.
  8.  
  9. Install the left closeout panel.
  10.  
  11. Install the fuse labeled HVAC CTRL (BATT).
  12.  

 
label.common.footer.alt.autozoneLogo