G6 2005-2007

Cables

Print

Removal & Installation



  1. Ensure that the park brake lever is in the fully released position.
  2.  
  3. Remove the floor console.
  4.  
  5. Remove the rear carpet.
  6.  
  7. Remove the right rear park brake cable or the left rear park brake cable from the console park brake bracket and the front park brake cable equalizer.

    Click image to see an enlarged view

    Fig. Inside vehicle parking brake cable components view

  8.  
  9. Raise and support the vehicle.
  10.  
  11. Remove the plastic retainer clip from the body.
  12.  
  13. Remove the tire and wheel assembly.
  14.  
  15. Remove the rear park brake cable retainer bolt.
  16.  
  17. Remove the rear park brake cable from the caliper park brake lever.
  18.  
  19. Lower the vehicle
  20.  
  21. Remove the plastic retainer clip from the stud.
  22.  
  23. Remove the park brake cable and pass-thru grommet from the body and remove the cable from the vehicle.
  24.  

To install:

  1. Install the park brake cable to the vehicle.
  2.  
  3. Install the park brake cable and pass-thru grommet to the body.
  4.  
  5. Install the plastic retainer clip to the stud.
  6.  
  7. Raise the vehicle.
  8.  
  9. Install the rear park brake cable to the caliper park brake lever.
  10.  
  11. Install the rear park brake cable retainer bolt.
  12.  
  13. Tighten the bolt to 89 inch. lbs. (10 Nm).
  14.  
  15. Install the plastic retainer clip to the body.
  16.  
  17. Install the tire and wheel assembly
  18.  
  19. Lower the vehicle.
  20.  
  21. Install the right rear park brake cable or the left rear park brake cable to the console park brake bracket and the front park brake cable equalizer.
  22.  
  23. Install the rear carpet.
  24.  
  25. Install the floor console.
  26.  
  27. Cycle the park brake lever 3-5 times.
  28.  

 
label.common.footer.alt.autozoneLogo