G6 2005-2007

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Scribe a line on the rear camber adjust bolts (both left and right).
  4.  
  5. Remove the rear axle toe link.
  6.  
  7. Remove the rear axle tie rod bracket brace.
  8.  
  9. Remove the muffler.
  10.  
  11. Remove the stabilizer shaft bracket bolts.
  12.  
  13. Remove the stabilizer shaft insulators from the stabilizer shaft.
  14.  
  15. Remove the stabilizer link to knuckle bolts.
  16.  
  17. Remove the stabilizer shaft.
  18.  

To install:

  1. Install the stabilizer shaft insulators.
  2.  
  3. Install the stabilizer shaft brackets.
  4.  
  5. Tighten the stabilizer shaft insulator bracket retaining bolts to 26 ft. lbs. (35 Nm).
  6.  
  7. Install the stabilizer shaft links to knuckle bolts and tighten to 41ft. lbs. (55 Nm).
  8.  
  9. Install the rear axle toe link.
  10.  
  11. Install the rear axle tie rod bracket brace.
  12.  
  13. Install the muffler.
  14.  
  15. Lower the vehicle.
  16.  

 
label.common.footer.alt.autozoneLogo