G6 2005-2007

Toe Link

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Remove the tire and wheel.
  4.  
  5. Remove the toe link to steering knuckle bolt.
  6.  
  7. Remove the toe link to support assembly bolt and nut.
  8.  
  9. Remove the toe link from the rear support assembly and vehicle.

    Click image to see an enlarged view

    Fig. Toe link removal Pontiac-G6

  10.  

To install:

  1. Install the toe link into the support assembly
  2.  
  3. Loosely install the toe assembly bolt and nut.
  4.  
  5. Install the toe link to steering knuckle.
  6.  
  7. Tighten the bolt and nut to 81 ft. lbs. (110 Nm) plus 70 degrees.
  8.  
  9. Tighten the toe assembly bolt and nut to 81 ft. lbs. (110 Nm) plus 70 degrees.
  10.  
  11. Install the tire and wheel.
  12.  
  13. Lower the vehicle.
  14.  
  15. Adjust the rear toe.
  16.  

 
label.common.footer.alt.autozoneLogo