G6 2005-2007

Removal & Installation

Print

  1. Remove the fuse labeled HVAC CTRL (BATT).
  2.  
  3. Remove the right closeout panel.
  4.  
  5. Remove the communication interface module.
  6.  
  7. Remove the OnStar module bracket.
  8.  
  9. Remove the recirculation door actuator screws.
  10.  
  11. Remove the recirculation door actuator.
  12.  
  13. Remove the recirculation door actuator wire harness connector.
  14.  

To install:

  1. Install the recirculation door actuator wire harness connector.
  2.  
  3. Install the recirculation door actuator.
  4.  
  5. Tighten the recirculation door actuator screws.
  6.  
  7. Install the OnStar module bracket.
  8.  
  9. Install the communication interface module.
  10.  
  11. Install the right closeout panel.
  12.  
  13. Install the fuse labeled HVAC CTRL (BATT).
  14.  

 
label.common.footer.alt.autozoneLogo