GM Astro/Safari 1985-1996 Repair Guide

Control Module

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Control module mounting

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the harness connector.
  4.  
  5. Remove the module by prying back the retaining clip on the bracket and sliding the module out.
  6.  

To install:
  1. Install the module and harness connector.
  2.  
  3. Connect the negative battery cable and check operation.
  4.  

 
label.common.footer.alt.autozoneLogo