GM Astro/Safari 1985-1996 Repair Guide

Blower Motor Resistor

Print

See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Blower motor resistor mounting location

A blower motor resistor is mounted on top of each blower/heater or blower/evaporator case.

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable from the battery.
  2.  
  3. Disconnect the electrical connector from the resistor.
  4.  
  5. Remove the resistor-to-case screws and lift the resistor from the case.
  6.  
  7. Install the resistor and retaining screws. Connect the electrical connector and negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo