GM Blazer/Jimmy/Typhoon/Bravada 1983-1993 Repair Guide

Vacuum Control Solenoid Valve

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Closed loop emission system components - 1.9L engine

  1. Disconnect the negative battery cable.
  2.  
  3. Disengage the solenoid valve electrical connector.
  4.  
  5. Disconnect the vacuum hoses from the vacuum regulator and solenoid. Tag them, as necessary to assure proper installation.
  6.  
  7. Remove the vacuum controller.
  8.  
  9. Installation is the reverse of removal.
  10.  

 
label.common.footer.alt.autozoneLogo