GM Blazer/Jimmy/Typhoon/Bravada 1983-1993 Repair Guide

General Information


See Figures 1 and 2

Two types of pipe connections are used on most exhaust systems, they are: the ball joint (to allow angular movement for alignment purposes) and the slip joint. Gaskets are used only with the ball joint type connections.

The system is supported by free hanging rubber mountings which permit some movement of the exhaust system but do not allow the transfer of noise and vibration into the passenger compartment. Any noise vibrations or rattles in the exhaust system are usually caused by damage or misalignment of the parts.

Before performing any operation on the exhaust system, be sure to allow it sufficient time to cool.

Click image to see an enlarged view

Fig. Fig. 1: Common exhaust system assembly

Click image to see an enlarged view

Fig. Fig. 2: Exhaust system components - 4.3L MFI-Turbo engine

As with many areas of service on your truck, the exhaust system presents its own dangers. Always follow safety precautions carefully during exhaust system service.