GM Buick/Oldsmobile/Pontiac/Full-Size 1975-1990 Repair Guide

Programmer

Print

REMOVAL & INSTALLATION



See Figure 1

This is used on Tempmatic systems only.

  1. Disconnect the negative battery cable and tape the end.
  2.  
  3. Remove the glove compartment.
  4.  
  5. Remove the aspirator and vacuum hoses.
  6.  
  7. Remove the temperature door rod from the crank.
  8.  
  9. Remove the temperature cable from the programmer.
  10.  
  11. Remove the programmer retaining screws and remove it from the case.
  12.  
  13. Installation is the reverse of removal.
  14.  



Click image to see an enlarged view

Fig. Fig. 1: Programmer used on Tempmatic systems

 
label.common.footer.alt.autozoneLogo