GM Cadillac Deville_Fleetwood_ELD_Seville 1990-1998

Amplifier

Print

removal & installation



Catera
  1. Remove the rear seat to rear window trim panel.
  2.  
  3. Disconnect the two wiring harness connectors from the radio signal processor.
  4.  
  5. Remove the radio speaker amplifier bracket bolts from the rear seat to rear window trim panel.
  6.  
  7. Lower the amplifier bracket from the rear parcel shelf.
  8.  
  9. Remove the two processor bolts.
  10.  
  11. Remove the processor from the amplifier bracket.
  12.  

To install:

  1. Install the processor into the amplifier bracket.
  2.  
  3. Install the two processor bolts until fully seated and not stripped.
  4.  
  5. Raise the amplifier bracket into the mounting position.
  6.  
  7. Raise the amplifier bracket into the mounting position.
  8.  
  9. Install the amplifier bracket bolts at the rear.
  10.  
  11. Connect the two wiring harness connectors.
  12.  
  13. Install the rear seat to rear window trim panel.
  14.  

 
label.common.footer.alt.autozoneLogo