GM Cadillac Deville_Fleetwood_ELD_Seville 1990-1998

Grille

Print

REMOVAL & INSTALLATION



Deville and Fleetwood
1990 Models


Click image to see an enlarged view

Fig. Grille and headlamp filler panel mounting screw locations-1990 Deville and Fleetwood



Click image to see an enlarged view

Fig. Headlamp filler panel installation-1990 Deville and Fleetwood

  1. Open the hood.
  2.  
  3. Remove the left and right headlamp filler panels.
  4.  
  5. Remove the 6 grille mounting screws and remove the grille.
  6.  

To install:

  1. Position the grille and install the mounting screws.
  2.  
  3. Install the headlamp filler panels.
  4.  

1991-93 Fleetwood and 1991-98 Deville


Click image to see an enlarged view

Fig. Remove the grille retaining bolts from the top of the grille and . . .



Click image to see an enlarged view

Fig. . . . the side of the grille

  1. Open the hood.
  2.  
  3. Remove the 5 screws attaching the grille to the grille support bracket.
  4.  
  5. Remove the 4 nuts attaching the grille to the hood and remove the hood.
  6.  

To install:

  1. Position the grille to the hood and support bracket.
  2.  
  3. Install the nuts to the hood and the screws to the support bracket.
  4.  

Eldorado and Seville
1990-91 MODELS


Click image to see an enlarged view

Fig. Grille installation-1990-91 Eldorado and Seville

  1. Open the hood.
  2.  
  3. Remove the 4 plastic screws and anchors securing the radiator/grille opening filler and remove the opening filler.
  4.  
  5. Remove the 2 plastic screws at each side of the grille securing the headlamp filler to the bracket.
  6.  
  7. Remove the 4 grille retainers. Pull the center pin out and remove with the anchor.
  8.  
  9. Remove the grille.
  10.  

To install:

  1. Position the grille and secure with the grille retainers. Push in the anchor and the center pin.
  2.  
  3. Install the 2 plastic screws at each side of the grille securing the headlamp filler to the bracket.
  4.  
  5. Position the radiator/grille opening filler and secure with the plastic anchors and screws.
  6.  

1992-98 ELDORADO


Click image to see an enlarged view

Fig. Grille installation-1992-98 Eldorado

  1. Open the hood.
  2.  
  3. Remove the 2 bolts securing the secondary latch release lever and the 2 nuts securing the grille support brace.
  4.  
  5. Remove the 6 grille-to-hood nuts and remove the grille.
  6.  

To install:

  1. Position the grille and install the 6 nuts.
  2.  
  3. Install the 2 nuts securing the support brace and the 2 bolts securing the secondary latch release lever.
  4.  

1992-98 SEVILLE


Click image to see an enlarged view

Fig. Grille installation-1992-98 Seville

  1. Open the hood.
  2.  
  3. Remove the 4 plastic rivets and unsnap the 2 clips securing the headlamp housing upper filler panel. Remove the filler panel.
  4.  
  5. Remove the 2 push pins and release the locking tabs.
  6.  
  7. Remove the grille.
  8.  

To install:

  1. Install the grille, making sure the retaining tabs engage the slots in the headlamp housing module.
  2.  
  3. Install the 2 push pins.
  4.  
  5. Install the headlamp housing upper filler panel. Snap the clips and install the plastic rivets.
  6.  

 
label.common.footer.alt.autozoneLogo