GM Camaro 1967-1981 Repair Guide

Lower Control Arm

Print

REMOVAL & INSTALLATION



See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: The lower control arm is mounted to the frame brackets with two bolts and nuts

  1. Remove the spring as described earlier in this section.
  2.  
  3. Remove the ball stud from the steering knuckle, as described earlier in this section.
  4.  
  5. Remove the control arm pivot bolts and the control arm.
  6.  
  7. To install, reverse the removal procedure. If any bolts are to be replaced, do so with bolts of equal strength and quality.
  8.  

 
label.common.footer.alt.autozoneLogo