GM Camaro 1982-1992 Repair Guide

Ignition Module

Print

REMOVAL & INSTALLATION



  1. Disconnect the wires from the cap.
  2.  
  3. Remove the distributor cap.
  4.  
  5. Remove the two module attaching screws and capacitor attaching screw. Lift module, capacitor and harness assembly from base.
  6.  
  7. Disconnect wiring harness.
  8.  

To install:
  1. Apply silicone grease underneath the module. This grease is necessary for ignition module cooling.
  2.  
  3. Connect the wiring harness.
  4.  
  5. Install the module and attaching screws.
  6.  
  7. Install the distributor cap and wires.
  8.  

 
label.common.footer.alt.autozoneLogo