GM Camaro 1982-1992 Repair Guide

Radio

Print

REMOVAL & INSTALLATION



See Figures 1 through 5

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the heater/radio trim panel.
  4.  
  5. Remove the radio to console attaching screws.
  6.  
  7. Remove the radio and disconnect the electrical connector.
  8.  

To install:
  1. Connect the electrical connector.
  2.  
  3. Install the radio to console attaching screws.
  4.  
  5. Install the heater/radio trim panel.
  6.  
  7. Connect the negative battery cable.
  8.  

Always connect the speakers before applying power to the radio as radio damage may result.



Click image to see an enlarged view

Fig. Fig. 1: Radio and front speaker removal



Click image to see an enlarged view

Fig. Fig. 2: Removing the radio trim plate



Click image to see an enlarged view

Fig. Fig. 3: Remove the radio attaching screws



Click image to see an enlarged view

Fig. Fig. 4: Pull the radio out far enough to reach the connectors behind it



Click image to see an enlarged view

Fig. Fig. 5: Disconnecting the radio connectors

 
label.common.footer.alt.autozoneLogo