GM Camaro 1982-1992 Repair Guide

Headlight Switch

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable at the battery.
  2.  
  3. Remove the four screws from inside the defroster duct (instrument panel pad securing screws).
  4.  
  5. Remove the screws which are under the lip of the instrument panel pad.
  6.  
  7. Remove the instrument panel pad.
  8.  
  9. On models equipped with air conditioning, remove the instrument panel cluster bezel and the cluster.
  10.  
  11. Remove the radio speaker bracket.
  12.  
  13. Pull the headlamp switch knob to the ON position, depress the locking button for the knob and shaft (located on the switch), and remove the knob and shaft.
  14.  
  15. Remove the switch bezel (retainer).
  16.  
  17. Disconnect the wiring from the switch and remove the switch.
  18.  
  19. To install, position the switch into place and connect the wiring to the switch.
  20.  
  21. Install the switch bezel (retainer).
  22.  
  23. Push the headlamp switch knob into the switch. (It may be necessary to depress the knob release button.
  24.  
  25. Install the radio speaker bracket.
  26.  
  27. On models equipped with air conditioning, install the instrument panel cluster bezel and the cluster.
  28.  
  29. Install the instrument panel pad.
  30.  
  31. Install the screws which are under the lip of the instrument panel pad.
  32.  
  33. Install the four screws from inside the defroster duct (instrument panel pad securing screws).
  34.  
  35. Connect the negative battery cable at the battery.
  36.  



Click image to see an enlarged view

Fig. Fig. 1: Headlight switch removal

 
label.common.footer.alt.autozoneLogo