GM Camaro 1982-1992 Repair Guide

Power Door Lock Actuator

Print

REMOVAL & INSTALLATION



See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: Door lock switch



Click image to see an enlarged view

Fig. Fig. 2: Door lock actuator

  1. Disconnect the negative battery cable. Remove the door panel.
  2.  
  3. Raise the window fully. Disconnect the electrical connector from the actuator.
  4.  
  5. Drive the rivet center pins out using a 1 / 8 in. (3mm) punch and hammer, then using a 1 / 4 in. (6mm) drill bit, remove the rivet head.
  6.  
  7. Remove the actuator rod and remove the door lock actuator.
  8.  
  9. Installation is the reverse of the removal procedure.
  10.  

 
label.common.footer.alt.autozoneLogo