GM Camaro 1982-1992 Repair Guide

Stabilizer Shaft

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Stabilizer removal

  1. Raise the car and safely support on jackstands.
  2.  
  3. Remove the link bolt, nut, grommet, spacer and retainers.
  4.  
  5. Remove the insulators and brackets.
  6.  
  7. Remove the stabilizer shaft.
  8.  

To install:
  1. Position the stabilizer shaft into place and install the insulators and brackets.
  2.  
  3. Hold the stabilizer shaft approximately 55mm from the bottom of the side rail and torque the bracket bolts to 37 ft. lbs. (50 Nm).
  4.  
  5. Install the bolt, nut, grommets, spacer and retainers.
  6.  
  7. Lower the car.
  8.  

 
label.common.footer.alt.autozoneLogo