GM Camaro 1982-1992 Repair Guide

Stabilizer (Sway) Bar

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Stabilizer end links

  1. Raise and support the rear end on jackstands.
  2.  
  3. Disconnect the end link bolts.
  4.  
  5. Remove the U-bolts and insulators.
  6.  
  7. Installation is the reverse of removal. Please refer to the torque specifications chart.
  8.  

 
label.common.footer.alt.autozoneLogo