GM Camaro 1982-1992 Repair Guide

Rear Window Wiper Motor

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Remove the wiper arm blade using tool J-8966 or equivalent.
  2.  
  3. Remove the nut and spacer on the wiper motor shaft.
  4.  
  5. Raise the lid and remove the lift window trim panel.
  6.  
  7. Disconnect the electrical connectors to the wiper motor.
  8.  
  9. Remove the rivets holding the motor support to the lift window panel and remove the assembly from the car.
  10.  
  11. To remove the motor, remove the screws retaining wiper motor to motor support.
  12.  

To install:
  1. Position the motor onto the motor support and install the screws.
  2.  
  3. Install the motor support with the motor onto the lift window panel and secure it with rivets or nuts/bolts.
  4.  
  5. Connect the electrical connectors to the wiper motor.
  6.  
  7. Install the lift window trim panel and lower the lid.
  8.  
  9. Install the nut and spacer on the wiper motor shaft.
  10.  
  11. Install the wiper arm blade.
  12.  



Click image to see an enlarged view

Fig. Fig. 1: Rear wiper motor assembly

 
label.common.footer.alt.autozoneLogo