GM Camaro 1982-1992 Repair Guide

Wiper Linkage

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

  1. Remove the wiper arms and blades. Remove the cowl screen or grille.
  2.  
  3. Disconnect the wiring from the wiper motor. Loosen, but do not remove the nuts which attach the transmission drive link to the motor crank arm. Then, disconnect the drive link from the arm.
  4.  
  5. Remove the transmission-to-body attaching screws from both the right and left sides of the car.
  6.  
  7. Guide the transmissions and linkage out through the cowl opening.
  8.  

To install:
  1. Guide the transmissions and linkage in through the cowl opening.
  2.  
  3. Install the transmission attaching screws to both the right and left sides of the car.
  4.  
  5. Connect the drive link to the arm. Tighten the nuts which attach the transmission drive link to the motor crank arm. Connect the wiring to the wiper motor.
  6.  
  7. Install the cowl screen or grille.
  8.  
  9. Install the wiper arms and blades.
  10.  



Click image to see an enlarged view

Fig. Fig. 1: Windshield wiper linkage assembly



Click image to see an enlarged view

Fig. Fig. 2: Using the wiper linkage separator



Click image to see an enlarged view

Fig. Fig. 3: Wiper linkage installer

 
label.common.footer.alt.autozoneLogo