GM Camaro/Firebird 1993-1998 Repair Guide

Electronic Brake Control Relay

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the electronic brake control relay cover.
  4.  
  5. Detach the electronic brake control relay from the connector.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: The electronic brake control relay is located in the electrical center, under the hood

To install:
  1. Attach the electronic brake control relay to the connector.
  2.  
  3. Install the relay cover.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo