GM Camaro/Firebird 1993-1998 Repair Guide

Flashers

Print

REPLACEMENT



See Figure 1

The turn signal flasher is mounted behind the instrument panel on the driver knee bolster bracket. To replace the turn signal flasher:

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the clip and flasher from the instrument panel tie bar.
  4.  
  5. Detach the electrical connector.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the turn signal flasher mounting

  1. If necessary, remove the flasher from the clip.
  2.  

To install:
  1. If removed, install the turn signal flasher to the lamp.
  2.  
  3. Attach the flasher electrical connector.
  4.  
  5. Attach the clip to the driver knee bolster bracket.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo