GM Camaro/Firebird 1993-1998 Repair Guide

Exhaust Pipe



See Figures 1 and 2

The exhaust manifold-to-crossover pipe connections are of the ball type, which eliminates the need for gaskets. Remove the front pipe retaining nuts, space and heat riser, if equipped. Separate the front pipe from the converter using a torch (to heat the pipe to aid in removal), or if the pipe is be replaced you can cut the outside pipe carefully and remove it. Remove the air injection pipes, as required. Installation is the reverse of the removal, pay special attention to the fit and alignment of the system. Secure with new clamps.

Click image to see an enlarged view

Fig. Fig. 1: Manifold attachment points

Click image to see an enlarged view

Fig. Fig. 2: AIR system attachment