GM Camaro/Firebird 1993-1998 Repair Guide

Muffler

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

The mufflers are a tri-flow design. Some muffler installations have a slot in the inlet and/or outlet pipe which indexes to a key (tab) welded on the exhaust and/or tail pipe to help maintain alignment. Remove any necessary clamps and carefully separate the pipe from the muffler using a suitable tool. Installation is the reverse of the removal procedure, pay special attention to the fit and alignment of the system. Secure with new clamps.



Click image to see an enlarged view

Fig. Fig. 1: Intermediate pipe attachment at muffler



Click image to see an enlarged view

Fig. Fig. 2: Muffler hanger attachment



Click image to see an enlarged view

Fig. Fig. 3: Intermediate pipe attachment

 
label.common.footer.alt.autozoneLogo