GM Camaro/Firebird 1993-1998 Repair Guide

Power Seat Adjuster Switch

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3 and 4

  1. Disconnect the negative battery cable.
  2.  
  3. Unfasten the retaining screws, then remove the hinge arm trim cover.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Remove the hinge arm trim cover retaining screw(s) ...



Click image to see an enlarged view

Fig. Fig. 2: ... the remove the cover from the side of the seat bottom

  1. Detach the connector from the adjuster assembly by releasing the retainers.
  2.  
  3. Installation is the reverse of the removal procedure.
  4.  



Click image to see an enlarged view

Fig. Fig. 3: Release the retainers, then detach the adjuster electrical connector

 
label.common.footer.alt.autozoneLogo